ASIC hashboard diagnostics
See every chip on the board in seconds.
HashProbe is a handheld bench tester for ASIC miner hashboards. Connect the board, press Run, and the whole chip chain lights up on a board-shaped canvas — with a plain replace-or-keep verdict for every die. No laptop, no control board, no guessing.
Sold and shipped by Antminer Repair LLC. Checkout and payment are handled on antminer-repair.com.
This is the actual on-device interface, replaying a recorded bench run. Drag the scrubber, pan and zoom the board, click any chip.
What you see
The board, not a spreadsheet
Every die is a cell that carries all of its own data. The layout matches the physical board, so a dead chip is where the dead chip is.
The whole chain
Walks the hashboard end to end and maps every die in order. The first break is shown where the chain actually stops — counted from the connector.
Cores, heat, errors
Per-die core count, temperature and error rate — read straight off the chips. Weak and silent cores show as they warm up.
A clear verdict
Each die reads keep, flaky or replace — and everything downstream of a break is marked so you fix the real fault, not the symptom.
Honest by design
Only what we verified on real hardware
We don't claim a board works until one has been on the bench. The compatibility list carries a real status for each board — detect, test, or load — and nothing more.
We build it ourselves
Need a board we don't list yet?
HashProbe is our own firmware and hardware — not a rebadged tool. That means we can add support for a new hashboard, chip or test you need. Send us the board or a capture, and we build it into a firmware update.
Put it on your bench
One device. Signed over-the-air updates. Support straight from the people who build it.
Pre-order HashProbe™